The High Flow Cat is engineered to comply with current regulations. However, selecting this option does NOT guarantee suitability for emission-controlled vehicles. This product, is strictly intended for off-road and competition use only and must not be installed on registered vehicles used on public roads. Customers are responsible for ensuring compliance with their respective state, federal, and local regulations. Please review the full terms and conditions at checkout.
 
 
Comp Ball Bearing Turbo
Wastegates  TS 45mm
Coupler [3″] OR [2.5-3″]
Hose clamps [(2)X3″] OR [(1)X2.5″/(1) X3″]
Manifold True Twin Scroll T4 Divided Dual Wastegate
3.5″ Down Pipe
Dump Tubes (X2)
Intercooler Piping with 3 Weld Fittings
3″ KSR HD Clamp Full Assembly
Vband Clamp for Down Pipe
Turbo Studs & Turbo Gasket (Trimed Studs)
10AN Nylon Braid Hose (X2 Feet)
10AN Hose end Fitting 1 X 45Degree
10 AN Hose end fitting 1 X 90 degree
Stainless Braid Oil feed Line 2 Feet Vibrant
Silicon Vacuum Hose (X 4 Feet)
Heat Shield with M8x16mm (X2)
4AN to 4AN 90 Degree Oil Feed Fitting
Oil Return Block Fitting 10AN (use factory bolt and O-ring)
Oil Feed Block Fitting 4AN (use factory bolt and O-ring)
Coolant Block Off Front (use factory bolt and O-ring)
Coolant Block Off Back
Turbo Oil Drain Fitting / with Bolts (qty.2)
M6x12mm Bolts for Intercooler Piping (X3) one for map
Heat Tape (20 Inches)
Vacuum T Fittings (X1)
1/8″ NPT Plugs (x2)
Turbo drain and feed line heat sleeve
Vacuum line heat sleeve